We can put a heavy duty centre reclaimed barn beam on large size sqaure tables. Check out this recent reclaimed wood pedestal table we made for an Etobicoke customer:

Project summary: 60” x 60” Square Reclaimed Ontario Barnwood Table we made for an Etobicoke, Ontario home – Hand-Hewn Beam Pedestal Base – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Bread Edge Ends – Premium epoxy + matte polyurethane finish – www.table.ca Continue reading →

6’ Reclaimed Ontario Barnwood Table we made for a Waterdown, Ontario home – Trestle Base [No bottom rail option] – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained –Bread Edges – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

For an even heavier duty look, consider our extra thick 3″ joist material top option [as opposed to our typical 2″ thick threshing floor]. Check out this recent reclaimed wood sawbuck table, bench and Strongback chair set we recently did:

Project details: 7′ Reclaimed Ontario Barnwood Table we made for a Welland, Ontario home – 44″ wide – Beam Option Sawbuck Base – Extra Thick 3” Joist Material Top – Reclaimed Old Growth Hemlock Threshing Floor Construction – Bread edge Ends – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – 7’ [matching] Trestle Bench – 2 Strongback Chairs / Wormy Maple / Polyurethane Clearcoat Finish – www.table.ca Continue reading →

7 ft Reclaimed Ontario Barnwood Table we made for a Cambridge, Ontario home – 50” wide – Sawbuck Base – Reclaimed Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + High Gloss Option polyurethane finish – Black painted with sandthroughs base – www.table.ca

Our high gloss option is our clearest finish. While it’s the most clear, the tradeoff is the high shine; which will reflect a lot. The perfectly clear finish will perfectly demonstrate the original pioneer barnwood distressing; and may be the best option in your case. Check out this recent reclaimed wood sawbuck table project we custom built for a Cambridge client: Continue reading →

Given the durability/waterproof nature of the epoxy + polyurethane finish, we offer reclaimed wood tables for commercial applications. For this project, we build a custom reclaimed wood cafeteria table for a Port Hope community centre. See pics below!

9′ Ontario barnwood Oval table we made for an Port Hope, Ontario community centre – 48″ wide – Hand-Hewn Beam Pedestals Base – 2″ Hemlock Threshing Floor Top – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

The history of Ontario pioneers is apparent in all our reclaimed wood tables given the amount of authentic character we maintain. Here’s a recent reclaimed wood pedestal table we made for a Cambridge home:

Details: 7′ Reclaimed Wood Pedestal Table we made for a Cambridge, Ontario home – 42″ wide – Beam Posts + Rail Option – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Greytone Treatment Option – Premium epoxy + satin polyurethane finish – Two 18″ leaves [making total length 10 ft when extended] – www.table.ca Continue reading →

All our tables can extend up to 18″ at either end. For this recent reclaimed wood trestle table project, we extended a 7 ft to 10 ft. Given the amount of distressing we maintain, centre leaves would not be practical; therefore we only offer them at the ends. See pics below:

Project details: 7′ Ontario barnwood trestle table we made for an Ingersoll, ON company – 48″ wide – 2″ Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – Two 18″ leaf extensions [making total length 10′ when extended] – www.table.ca Continue reading →

The general guideline for seating is 2 ft table length/person based on roughly 19″ chair width. A 5 ft, for example, would seat a max of 6. Check out this recent Ontario barnwood trestle table project we made for a Breslau home:

Specifications: 5′ 2″ Reclaimed Wood Table we made for a Breslau, Ontario home – 42″ wide – Trestle Base – Old Growth Hemlock Threshing Floor Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

The dark patina of the wood comes out when we apply our clearcoat finish. We took pictures before and after of this reclaimed wood trestle table project. See how the colour comes out:

Details: 10′ Reclaimed Wood Trestle Table we made for a Cambridge, Ontario home – 48″ wide – Hemlock Ontario Barnwood Threshing Floor 2″ Construction – Original edges & distressing maintained – Premium epoxy + satin polyurethane finish – www.table.ca Continue reading →

Our shaker chairs are a simple country style that complement the style of our tables. On this project the customer opted to have them painted black, which provides a nice contrast to the reclaimed wood sawbuck table top. The benches at the ends make for practical seating options and slide out of the way when not in use. See pics below! Continue reading →